Why does my board move away from the fence when I use a push stick? WOODWORKING Q&A

Why does my board move away from the fence when I use a push stick? WOODWORKING Q&A


Clickable here
Welcome to our woodworking Q&A blog post! Today, we will be discussing some of the questions that were asked in a popular YouTube video titled “Why does my board move away from the fence when I use a push stick?” In this video, the host addresses various topics related to woodworking, providing insightful answers to viewer inquiries. From tips on attaching catwalks to the wall to the pros and cons of using a dado blade on a table saw versus a router table, we will delve into the details with a professional tone. So, let’s get started and explore these interesting woodworking questions together!

Below Table of Contents

1. “Tips and Techniques for Attaching Woodworking Projects to Walls”

One of the common questions I receive is how to attach woodworking projects to walls. My go-to method is to first locate a stud by drilling a hole and checking for resistance. If I find a stud, I simply use a long screw to attach the bracket or object directly to it. In cases where there is no stud, I use an anchor to ensure a secure attachment. For example, when attaching cat platforms or walkways, I was able to hit a stud on one side and used an anchor on the other.

Another question I often get is about the pros and cons of using a dado blade on a table saw versus a router table. In my experience, making dados and rabbits is easier on the table saw using dado blades. When using a router, you may need to make multiple passes to fine-tune the size of the cut since router bits and lumber thicknesses often vary. Additionally, routers that take quarter inch shank bits may not be able to remove a lot of material at once, so it’s best to start with smaller cuts and gradually increase the size.

In terms of safety, both the table saw and router table require control over your workpiece. However, some find the router table to be more intimidating due to the spinning bit. It’s essential to have a firm grip and keep a steady hand while operating either machine. Overall, each tool has its advantages, and the choice ultimately depends on personal preference and the specific needs of the woodworking project.

2. “Comparing Dado Blades on Table Saws and Router Tables: Pros and Cons”

When it comes to making dados and rabbets, there are pros and cons to using either a dado blade on a table saw or a router table. Using a dado blade on a table saw can make the process easier because you can fine-tune the adjustment of the size. On the other hand, using a router bit on a router table often requires multiple passes to achieve the desired size due to variations in lumber thickness. Additionally, using a router, especially a lower-powered one with quarter-inch shank bits, means that only a small amount of material can be removed at once, so you may need to cut in multiple passes.

When using a router table for making rabbets, you will still need a fence that can be adjusted to increase the size of the rabbet over multiple passes. While safety concerns are present with both a table saw and a router table, the latter can be a bit more intimidating due to the spinning router bit and requires careful control over the workpiece.

Overall, the choice between using a dado blade on a table saw or a router table depends on factors such as the desired precision, the thickness of the materials being used, and the level of control and experience the user has with each tool. It’s important to consider these factors and choose the method that best suits your specific woodworking needs.

3. “Understanding the Challenges and Safety Considerations of Using a Router Table”

When using a router table, there are several challenges and safety considerations that need to be taken into account. First, finding the right location to attach the table to the wall is crucial. To ensure stability, it is recommended to attach the table to wall studs. If a stud cannot be found, using anchors is the next best option. This combination of attaching methods provides stability and safety for the router table.

Another challenge when using a router table is the choice between using a dado blade on a table saw or a router bit on the router table. While both methods can be used to make dados and rabbets, there are some pros and cons to consider. Using a dado blade on a table saw allows for easier fine-tuning of the adjustment, as the size of the lumber may not always be exact. However, on a router table, setting up a fence can still achieve the desired results over multiple passes.

Additionally, safety is a crucial consideration when using a router table. Although there may not be a significant difference in safety between a table saw and a router table, the router table may feel more intimidating due to the spinning bit. It is essential to have control over the workpiece and to take measures to ensure the bit does not grab or cause any accidents. Following proper safety protocols and using appropriate safety equipment, such as goggles and push blocks, can help mitigate any potential risks when using a router table.

In conclusion, is essential for a successful woodworking experience. From properly attaching the table to the wall to choosing the right method for making dados and rabbets, careful attention to detail and safety protocols will ensure the best results. With the right knowledge and precautions in place, using a router table can be a valuable tool in any woodworker’s arsenal.

4. “Mastering the Art of Making Dados and Rabbets: Table Saw vs. Router Table

When it comes to making dados and rabbets, one common question is whether to use a table saw or a router table. Both tools have their pros and cons, so let’s take a closer look.

Using a dado blade on a table saw offers some advantages. It allows for precise adjustments, ensuring a snug fit for your joinery. However, it’s important to keep in mind that the actual thickness of your lumber may not match the specified size. This means that you may need to make multiple passes to achieve the desired depth. Additionally, while using a table saw, you’ll need to have a fence that can be adjusted to increase the size of the rabbet over multiple passes.

On the other hand, using a router table for making dados and rabbets can also be a viable option. The advantage here is that you can fine-tune the adjustment to match the thickness of your lumber. However, routers, especially those with low power and quarter-inch shank bits, may have limitations when it comes to removing a significant amount of material in one go. This means you may need to start with smaller cuts and gradually work your way up.

In terms of safety, both the table saw and the router table require caution and control. However, it’s worth noting that the router table can be more intimidating due to the spinning bit and requires careful handling of the workpiece. In the end, the choice between a table saw and a router table depends on your comfort level, project requirements, and the specific joinery tasks you need to accomplish.

Q&A

Q: Why does my board move away from the fence when I use a push stick in woodworking?
A: When using a push stick in woodworking, it is possible for your board to move away from the fence due to a few reasons. One reason could be that the push stick is not providing enough pressure against the board, causing it to shift. Another reason could be that the push stick is not aligned properly with the board, leading to uneven pressure distribution. Additionally, it could be a result of the type of wood you are working with or the condition of the fence itself. Ensuring proper technique and using a push stick with sufficient pressure can help prevent the board from moving away from the fence during woodworking tasks.

Q: How do you attach catwalks to the wall in woodworking projects?
A: To attach catwalks or any other item to a wall in woodworking projects, it is important to find a stud for secure attachment. One method is to drill a hole and check if there is a stud present. If a stud is found, a long screw can be used to attach the bracket or item directly into the stud. If a stud is not found, an anchor can be used in the drilled hole to provide stability. In some cases, a combination of attaching to studs and using anchors may be necessary for optimal support. Utilizing a stud finder is also an option, but it may not be necessary if you have a specific position in mind for attaching the item.

Q: What are the pros and cons of using a dado blade on a table saw versus a router table in woodworking?
A: When it comes to making dados and rabbits in woodworking, the choice between using a dado blade on a table saw or a router table has its pros and cons. Using a dado blade on a table saw can often be easier because it allows for fine-tuning adjustments to fit the size of the lumber being used. On the other hand, using a router table with a router bit may require multiple passes to achieve the desired size of the dado or rabbit, especially when working with plywood or sanded solid lumber that may vary in thickness. Additionally, using a router with a lower-powered motor and quarter-inch shank bits may limit the amount of material that can be removed at once, requiring multiple passes. In terms of safety, both methods require control over the workpiece, but some may find a router table to be slightly more intimidating due to the spinning bit. It is important to exercise caution and have proper control over the workpiece when using either method.

Final Notes

piece and potentially cause kickback or other safety issues. Overall, both methods have their pros and cons, but I personally find using a dado blade on a table saw to be easier and more precise. However, it’s important to remember to always prioritize safety and follow proper techniques when using either tool.
Clickable here

When doing woodworking, many individuals use a push stick to help guide a board through a tool such as a saw. But sometimes the board moves away from the fence when the push stick is used. So why does this happen?

The reason why a board will move away from the fence when a push stick is used can be attributed to several factors. The first and most basic reason is friction. When the push stick is pressed against the board, it’s possible for the board’s motion through the saw to be impeded slightly – resulting in the board being forced away from the fence as it’s pushed. In order to minimize this, it’s important to lubricate the push stick with wax, oil, or other substance that allows the board to move more freely.

The second reason why a board may move away from the fence is an incorrect fence setting. If the fence is not set between the blade and the board, the board will be pulled away from the fence as it is pushed. This is because the blade acts as a lever, and any pressure applied to it can cause the board to be shifted in the direction of the lever. To prevent this, the fence should be adjusted so that it’s firmly and evenly applied to the board.

Lastly, a board may move away from the fence if the push stick being used is too thin. If the push stick is too thin, it may not sufficiently hold the board against the fence, resulting in it being pulled away. To prevent this, it’s important to use a push stick of appropriate dimensions, particularly one that can provide adequate resistance against the board.

When woodworking, it’s common for a board to be pushed away from the fence when a push stick is used. Thankfully, this can be easily prevented by ensuring that the push stick is properly lubricated, the fence is correctly set, and the push stick is of the appropriate dimensions. By following these simple steps, woodworkers will be able to ensure their board remains firmly in place as they push it through the saw.


Posted

in

, , , , , , , , ,

by

Tags: