In this blog post, we will be discussing the topics covered in the YouTube video titled “”. In this video, the creator showcases a unique coat rack design that incorporates drawers to hold small items such as keys and change. The wood used for this project is curly redwood, generously provided by Rick Beall, along with shaker pegs sent by Tim Schlueter.
The video begins by highlighting the process of creating the drawers, with the creator using a simple system to make all four drawers simultaneously. The fronts of the drawers are cut from 5/8 inch thick curly redwood, while the side pieces and back are made from half-inch pine. Notably, the creator shares a common mistake made when cutting rabbits for the bottoms of the drawers, but decides to let it slide as it won’t affect the functionality of the piece.
Moving on, the video demonstrates the assembly of the drawers, with one-inch wide blocks placed evenly to ensure proper glue adhesion. Despite not having enough curly redwood for the back of the coat rack, the creator improvises by using MDF instead. Thin drawer dividers are also added, providing organization and structure to the drawers.
The next step involves creating a trim piece for the coat rack, using a Roman ogee bit in the router. The creator opts not to use the bearing on the router, and instead sets up a fence and feather boards to achieve a larger profile. This profile will serve as molding on the top of the coat rack.
Overall, this YouTube video provides a comprehensive guide on how to make a shaker inspired wood coat rack with drawers. From the selection of materials to the construction of the drawers and trim piece, the creator offers valuable insights and tips along the way. If you are interested in adding functionality and style to your entryway with a coat rack, this video is definitely worth a watch.
Below Table of Contents
- 1. Adding Functionality: Creating a Shaker Inspired Wood Coat Rack with Drawers
- 2. Simplifying the Drawer-Making Process: How to Easily Make Drawers for Your Coat Rack
- 3. Exploring Design Elements: Incorporating Trim Pieces for a Unique Coat Rack
- 4. Completing the Project: Finishing Touches and Assembly for Your Shaker Inspired Wood Coat Rack
- Q&A
- Final Notes
1. Adding Functionality: Creating a Shaker Inspired Wood Coat Rack with Drawers
In this post, we will be discussing the process of adding functionality to a shaker-inspired wood coat rack by creating drawers. This unique coat rack is designed to not only hold coats but also serve as a storage solution for small items such as keys or change. The main wood used for this project is curly redwood, generously sent to the creator by Rick Beall, while the shaker pegs were provided by Tim Schlueter.
Creating the drawers for this coat rack may seem challenging, but the creator has come up with an easy system to make all four drawers at once. Starting with a length of 5/8 inch thick curly redwood, the fronts of the drawers are cut. The side pieces and back, known as the secondary surfaces, are cut from half-inch pine. Rabbets, which are shallow grooves, are cut to hold eighth-inch plywood that will make up the bottom of the drawers.
A common mistake made when cutting rabbets for drawer bottoms is cutting all the way through to the end, leaving a visible notch. While this mistake is present in this project, the creator decides to let it slide as it won’t be significantly noticeable. Once the drawer is glued up, one-inch wide blocks are cut and spaced evenly to provide additional support. These blocks are then cut down the middle for a secure fit. To complete the back of the coat rack, MDF is used since there isn’t enough curly redwood available.
Next, thin drawer dividers are cut and installed, creating compartments within the drawers. These dividers are slightly wider to allow for a snug fit. The back piece is then glued onto the coat rack, and the drawer system is tested to ensure a proper fit. Once confirmed, the piece is clamped down and left to dry. With the dividers in place, the next step is to work on the trim piece. This involves using a Roman ogee bit in the router to create a decorative profile.
2. Simplifying the Drawer-Making Process: How to Easily Make Drawers for Your Coat Rack
In this post, we will discuss an easy system to simplify the process of making drawers for your coat rack. Making drawers can sometimes be a hassle, but with our step-by-step guide, you can make all four drawers at once.
To start, you will need specific materials. We recommend using a length of 5/8 inch thick curly redwood for the fronts of the drawers. For the side pieces and the back, you can use half-inch pine. Cut out eighth inch deep rabbits to hold an eighth-inch plywood that will make up the bottom of the drawers. Avoid a common mistake of cutting the side pieces all the way through, leaving a visible notch.
Once the drawers are cut and the bottom panel is in place, it’s time to assemble them. Cut three one-inch wide blocks to space evenly along the drawers and ensure a secure fit. Apply glue to make sure it touches the base, back, and front surfaces. Cut down the middle of each block to create even spacing. If you don’t have enough curly redwood for the coat rack’s back, MDF will work just fine. Install thin drawer dividers, making them slightly wider to fit properly. Glue everything together, and double-check that the drawers fit smoothly.
After assembling the drawers, the next step is to work on the trim piece. Install a Roman ogee bit into your router to create a decorative profile. Set up your fence and feather boards, then run the board through on its edge to create a larger profile. This profile can be used as a molding piece on the top of your coat rack.
By following these steps, you can easily make drawers for your coat rack and simplify the process of creating a functional and stylish piece for your home. Stay tuned for more tips and tricks on woodworking projects.
3. Exploring Design Elements: Incorporating Trim Pieces for a Unique Coat Rack
Incorporating trim pieces into a coat rack can elevate its design and make it stand out as a unique piece. For this shaker-inspired coat rack, I decided to add drawers to hold small items like keys or loose change. The wood used for this project is curly redwood, generously shared by Rick Beall, and the shaker pegs were provided by Tim Schlueter.
Creating drawers can sometimes be a cumbersome task, but I’ve developed an easy system to make all four drawers simultaneously. To start, I cut a length of 5/8-inch thick curly redwood for the fronts of the drawers. The side and back pieces were made from half-inch pine, and I created eighth-inch deep rabbets to hold an eighth-inch plywood bottom. As always, a common mistake I made was cutting the rabbets too deep, resulting in a slight notch. Although not highly visible, I made a mental note for future projects.
Once the drawers were glued up, I cut three one-inch wide blocks to evenly space and secure them. Ensuring that glue bonded the base, back, and front was a priority. From here, I moved on to constructing the back of the coat rack. Since I didn’t have enough curly redwood, I opted for MDF instead. Thin drawer dividers were created slightly wider to accommodate the space, and a piece of wood was prepared for the top section.
After gluing everything together with the assistance of dividers as spacers, the drawers were checked for proper fit. With the dividers firmly in place, the next step involved adding a trim piece. To create a more pronounced profile, I used a Roman ogee bit on the router without the bearing. This allowed me to have more control while running the board on its edge. The resulting profile would serve as a decorative molding for the top of the coat rack.
By incorporating these design elements and carefully selecting materials, this coat rack is sure to stand out as a unique and aesthetically pleasing addition to any space. The combination of curly redwood, shaker pegs, and thoughtful craftsmanship creates a functional yet visually appealing piece that is sure to catch the eye of anyone who sees it.
4. Completing the Project: Finishing Touches and Assembly for Your Shaker Inspired Wood Coat Rack
To complete the project and add the finishing touches, we will start by assembling the drawers. Using a length of 5/8 inch thick curly redwood for the fronts of the drawers, cut out the side pieces and the back from half-inch pine. Create an eighth inch deep rabbit in each side piece to hold an eighth inch plywood for the bottom of the drawers. Although there may be a mistake in cutting the rabbits all the way through, it will not be very visible once assembled and can be overlooked. Glue all the parts together and reinforce with one inch wide blocks evenly spaced along the drawers for added strength.
Next, we will work on the back of the coat rack. Since there isn’t enough curly redwood to fit for the back, we will use MDF instead. Cut thin drawer dividers and a piece of wood for the top. Glue the dividers in place, using them as spacers while assembling the back. Double-check that the drawers fit properly before gluing everything together. Clamp the assembly to a block of wood for added stability.
Once the drawers and back are assembled, we can move on to the trim piece. Install a Roman ogee bit into a router and set up the fence and feather boards. Run a board through on its edge to create a larger profile for molding on the top. This will add a decorative touch to the coat rack. With the trim piece completed, it can be attached to the assembly to finish the project.
By following these steps, you will be able to complete your shaker-inspired wood coat rack and add the necessary finishing touches. The combination of sturdy drawers, a well-assembled back, and a decorative trim piece will make your coat rack both functional and visually appealing.
Q&A
Title: Q&A: Making a Shaker Inspired Wood Coat Rack with Drawers
Q: What makes this coat rack unique compared to others?
A: This coat rack is unique because it features drawers that can hold small items like keys or change. The design is inspired by the Shaker style, which adds a touch of elegance to the project.
Q: How did you make the drawers for the coat rack?
A: Making the drawers for this coat rack was made easier by using a simple system. The front parts of the drawers were cut from 5/8 inch thick curly redwood, while the side pieces and the back were made from half-inch pine. The bottom of the drawers was made from eighth-inch plywood, attached with eighth-inch deep rabbits.
Q: Did you encounter any challenges during the drawer-making process?
A: Yes, there was a slight mistake made when cutting the rabbits for the drawer bottoms. The side pieces were cut all the way through instead of stopping at a certain point. Although the mistake might be slightly visible, it was decided to let it slide and not impact the overall functionality or aesthetics of the coat rack.
Q: How did you ensure a sturdy construction for the drawers?
A: To ensure sturdiness, three one-inch wide blocks were evenly spaced and glued in between the front, back, and base of each drawer. This allowed for strong glue connections on all sides.
Q: What material did you use for the back of the coat rack?
A: Due to not having enough curly redwood to use for the back, MDF (medium-density fiberboard) was used instead. Since the back is not visible, this choice did not affect the overall appearance of the coat rack.
Q: How did you add dividers to the drawers?
A: Thin drawer dividers were cut and made slightly wider to fit into the drawers. These dividers help separate items stored in the drawers, ensuring organization and ease of use.
Q: How did you assemble the coat rack with drawers?
A: The coat rack was assembled by gluing the back piece onto the drawers. The dividers were used as spacers during this process to ensure the drawers fit properly. After gluing, the coat rack was clamped down for a secure attachment.
Q: Did you add any decorative trim to the coat rack?
A: Yes, a trim piece was added as the next layer of the coat rack. A Roman ogee bit was used in the router to create a larger profile for the trim. The resulting profile was used as a decorative molding piece at the top of the coat rack.
Q: What tools did you use for creating the trim piece?
A: For creating the trim piece, a Roman ogee bit was used in the router. Additionally, a fence and feather boards were set up to guide the wood through the router, creating the desired profile.
Note: This Q&A is based on the provided YouTube video transcript and contains information about making a Shaker inspired wood coat rack with drawers.
Final Notes
So there you have it, a shaker inspired wood coat rack with drawers. This project was a little different from my usual ones, as I decided to start with the drawers first. Making drawers can sometimes be a hassle, but I came up with an easy system to make all four at once.
I used curly redwood for the fronts of the drawers, which was graciously sent to me by Rick Beall. The side pieces and the back were made from half-inch pine. I made sure to cut out rabbits to hold the eighth-inch plywood for the bottom of the drawers.
I must admit, I made a small mistake while cutting the rabbits. I accidentally cut them all the way through to the end, creating a notch that will be slightly visible once the bottom panel is in place. However, I believe it won’t be too noticeable, so I decided to let it slide.
After gluing up the drawers, I added one-inch-wide blocks to ensure the base, back, and front were securely glued together. I then cut the blocks in half to create dividers for the drawers.
For the back of the coat rack, I didn’t have enough curly redwood left, so I opted for MDF instead. I also cut thin drawer dividers and a trim piece to complete the look of the coat rack.
To assemble everything, I used the dividers as spacers while gluing it all together. Once everything was dried and secured, I added a Roman ogee profile to the trim piece for a decorative touch.
And there you have it – a beautiful shaker inspired wood coat rack with drawers. This project was both challenging and rewarding, and I’m pleased with the final result. I hope you enjoyed coming along on this journey with me, and perhaps you’ll be inspired to create your own shaker-inspired masterpiece. Stay tuned for more woodworking projects and tips coming soon.
Introducing a DIY project, make a simple and stylish wooden coat rack with drawers that’s inspired by the Shaker style of furniture. Perfect for any space in your home, this versatile piece offers a modern touch to a timeless classic.
This design offers a few unique features, including four medium and two small drawers for additional storage. The open shelf is ideal for hanging bags, hats, and other items. Each drawer has a pull-out handle for easy access, as well as a frosted glass bottom for a more refined look.
The build itself is both easy and fun. Start by gathering all of the materials you will need – pine boards, drawer sides, drawer pulls, drawer slides, and your choice of finish. Cut the wood into the required sizes based on the measurements provided in the plans. Assemble the drawers first and use wood glue to make sure the edges meet up securely. Once the drawers are complete, join the boards together to create the frame of the coat rack. Secure any necessary hardware with a drill or screwdriver.
Lightly sand any rough edges and apply the optional finish. This project is designed for the DIY beginner as no advanced joinery is required. With a bit of patience and time, you’ll have a brand new coat rack in no time.
Final assembly is fairly straightforward. Attach the drawers to the frame and secure them with accents screws. Install the pulls and add the drawers rails as the last step. Now your coat rack is complete and ready to spruce up any room.
Bring a touch of style to your home with this easy-to-make wood coat rack with drawers. This design is a cheerful blend of classic Shaker style and modern flair, adding a touch of style to any space. Best of all, the project won’t require a ton of time or money, making it a great addition to any home renovation list.