Welcome to our blog, where we delve into the world of crafting and woodworking. In today’s post, we will be discussing the process of building a jewelry box, specifically focusing on the assembly of the lid and case. This topic is inspired by an informative YouTube video titled “”. In the video, the expert craftsman takes us through the steps of creating a beautifully crafted lid using cherry wood, maple inlays, and a plywood base. He explains his technique of laminating the wood pieces together to create a sturdy top for the jewelry box. Additionally, he demonstrates how to carve grooves in the maple strips to securely hold the lid in place. During the video, he also highlights some additional considerations, such as rounding over sharp edges and covering the backside of the lid with a more aesthetically pleasing material. Join us as we explore these techniques and gain valuable insights into the art of jewelry box making.
Below Table of Contents
- 1. Creating the Lid for the Jewelry Box: A Step-by-Step Guide
- 2. Assembling the Lid and Case: Tips and Techniques
- 3. Enhancing the Look of Your Jewelry Box: Rounding Over and Adding Inlays
- 4. Finishing Touches: Dealing with the Medallion and Backside of the Jewelry Box
- Q&A
- Final Notes
1. Creating the Lid for the Jewelry Box: A Step-by-Step Guide
To create the lid for the jewelry box, start by cutting a couple of pieces of cherry wood and planing them down to about a sixteenth of an inch thick. Cut a strip of maple wood to act as an inlay. Glue all of these pieces together on a quarter-inch piece of plywood. Once glued, you can cut the pieces out to create the lid. The medallion will sit on top of the lid.
Next, prepare the frame for the lid by using 3/4 inch maple strips. Cut them into one-inch wide strips and carve a groove down the middle to hold the laminated top pieces. Make sure the strips are the same length as the top of the box. Cut them at 45-degree angles, measuring twelve and a half inches long. Once the laminated boards are cut to size, fit one piece into the slots of the frame. Then, glue it all together.
Before gluing the frame with the inside panel, there are a few things to address. Firstly, round over the sharp edge of the lid to give it a softer look using a router. Secondly, clamp down the warped medallion tightly to ensure a smooth surface. Clamp it to the inside piece before attaching the frame. Lastly, cover up the plywood backside of the lid with your preferred material, such as felt or leather. Additionally, consider chamfering the inside edge at a 45-degree angle for a sloping effect.
Take note that applying a finish on the medallion might require spraying instead of using a brush. Test spraying an alcohol-based clear coat on the gold paint to ensure it adheres properly. Remember that once the lid is assembled, it cannot be finished separately from the rest of the box. Finally, round over the inside edges using a quarter-inch roundover bit in a router for a smooth and rounded finish.
Overall, creating the lid for the jewelry box involves laminating cherry and maple pieces, constructing the frame, addressing any imperfections, and applying the appropriate finishes for a polished final outcome.
2. Assembling the Lid and Case: Tips and Techniques
For the top of the box, you’ll need a couple of pieces of cherry cut to about a sixteenth of an inch thick, as well as a strip of maple for the inlay. Glue all of these together on a quarter-inch piece of plywood and then cut them out to create a nice top for the box. The medallion will sit on top of the lid. You can use bricks or any other heavy objects to apply pressure while the glue dries for laminating the top.
Next, you’ll need 3/4 inch maple strips that are one inch wide. Carve a groove down the middle of each strip to hold the laminated top pieces. Cut these strips to the same length as the top of the box, making them 45-degree angles and 12.5 inches long. These strips will be used to frame the lid and case.
Before gluing everything together, there are a few additional steps you can take to improve the final result. Firstly, round over the sharp edge of the lid to give it a softer look using a router. Secondly, if the medallion is warped, clamp it tightly to the inside piece before attaching the frame. Lastly, consider covering the backside of the lid, which is made of plywood, with a material like felt or leather. Alternatively, you could have a mirror cut to put in that space. Also, chamfer the inside edge at a 45-degree angle to create a sloping effect.
To finish the medallion, spraying a clear coat is recommended instead of brushing on a finish as it tends to clump up and look unattractive. Note that lacquer might not work well with gold paint, so opt for an alcohol-based clear coat. It is important to complete these finishing processes before assembling the entire box, as it will be difficult to do so once everything is attached.
3. Enhancing the Look of Your Jewelry Box: Rounding Over and Adding Inlays
For the top of the jewelry box, the craftsman demonstrates how to enhance its look by adding inlays. He starts by cutting thin pieces of cherry wood, planing them down to about a sixteenth of an inch thick. Then, he cuts a strip of maple to be used as an inlay. These pieces are glued together on a quarter inch piece of plywood and then cut to create a beautiful laminated top. The medallion is then placed on top of the box. The craftsman mentions that his lamination process involves stacking bricks on top of the glued pieces to ensure a secure bond.
Next, he moves on to creating the frame for the box. He uses 3/4 inch maple strips that are cut to one inch wide. A groove is carved down the middle of each strip to hold the laminated top pieces. To match the length of the box’s top, the strips are cut at 45-degree angles to be twelve and a half inches long. Once the laminated boards are cut to size and fit into the frame slots, he proceeds to glue them together.
Before finalizing the box, the craftsman identifies a few aesthetic concerns. He decides to round over the sharp edges of the frame to give it a softer look. He plans to use a router with a quarter-inch roundover bit for this task. Additionally, he addresses the warping of the medallion by clamping it tightly to the inside piece before attaching the frame. He also mentions that he wants to cover up the plywood backside of the box, possibly with felt, leather, or even a cut mirror. Lastly, he expresses a desire to chamfer the inside edge at a 45-degree angle.
To ensure a flawless finish on the medallion, the craftsman notes that brushing a finish on it didn’t yield satisfactory results. Instead, he plans to use an alcohol-based clear coat spray to seal it and enhance its appearance. He also mentions that lacquer won’t work on the gold paint applied to the medallion. As a result, he opts for the alcohol-based clear coat spray.
Moving forward, the craftsman prepares to round over the inside edges of the box using a quarter-inch roundover bit in his router. This step will provide a nice, rounded appearance to the edges, further enhancing the overall look of the jewelry box.
4. Finishing Touches: Dealing with the Medallion and Backside of the Jewelry Box
To create the top of the jewelry box, the craftsman explains that he cuts thin pieces of cherry and planes them down to a sixteenth of an inch thickness. He then adds a strip of maple as an inlay and glues all these pieces together on a quarter-inch plywood. This creates a laminated top that will serve as a base for the medallion. The craftsman mentions that he uses a stack of bricks to apply pressure and laminate the pieces together.
Moving on to the backside of the jewelry box, the craftsman shares his plan to cover up the unsightly plywood with a more appealing material. He considers options such as felt or leather, and even mentions the possibility of having a mirror cut to fit in that area. Additionally, he notes that the inside edge of the backside will be chamfered at a 45-degree angle to create a sloping effect towards the material used to cover it.
The craftsman also addresses the medallion, explaining that it needs to be clamped down tightly as it is slightly warped. He mentions the challenge of finding clamps that can reach beyond the frame, so his solution is to clamp the medallion to the inside piece before attaching the frame. Additionally, he discusses the issues he faced with finish application on the medallion, noting that he had to switch to an alcohol-based clear coat spray because brushing on a finish caused it to clump up.
Q&A
Title: Q&A: Lid and Case Assembly for Building a Jewelry Box – Tips and Techniques
Introduction:
Welcome to our blog post where we will be discussing the topics covered in the YouTube video titled “.” In this video, the creator demonstrates the process of assembling the lid and case of the jewelry box using cherry, maple, and plywood. We will provide answers to some common questions that may arise while following this tutorial. So, let’s dive into the Q&A.
Q1: What materials are used to create the lid of the jewelry box?
A: The lid of the jewelry box is made using pieces of cherry wood for the main surface, planed to about a sixteenth of an inch thickness. Additionally, a strip of maple wood is used as an inlay. To hold everything together, a quarter-inch plywood base is utilized.
Q2: How is the lid assembled using these materials?
A: The video demonstrates the process of gluing the cherry and maple pieces together on the plywood base. This creates a laminated top surface. The final step is to cut the assembled lid according to the desired size and shape.
Q3: What techniques are used to assemble the lid and case?
A: The video shows the creator using 3/4 inch maple strips, cut to an inch wide, to create the frame for the lid. A groove is carved down the middle of these strips to accommodate the laminated top. The frame is then cut at 45-degree angles and sized to fit the top of the box. Finally, the frame and the inside panel are glued together to complete the lid assembly.
Q4: What modifications or enhancements can be made during the assembly process?
A: The video mentions a few modifications you can consider. First, the creator recommends rounding over the sharp edge of the lid for a softer look using a router. Additionally, the medallion on top of the lid, if warped, should be clamped down tightly before attaching the frame. The backside of the lid, which may appear unsightly, can be covered with materials like felt, leather, or even a mirror. Finally, the inside edge can be chamfered at a 45-degree angle for a neat finish.
Q5: Is there any specific finish or coating recommended for the lid assembly?
A: According to the video, brushing a finish on the medallion may not yield satisfactory results. Therefore, it is suggested to use an alcohol-based clear coat and spray it onto the medallion. Furthermore, the creator mentions that lacquer may not work well on gold paint, so an alternative clear coat is preferred. It is important to note that finishing should be done after the entire box is assembled.
Q6: Any other tips or suggestions for building the lid and case assembly of a jewelry box?
A: Aside from the mentioned modifications, the video does not cover any additional tips specific to the lid and case assembly. However, it is recommended to follow the video closely, take proper safety precautions, and adapt the techniques according to your own woodworking skills and available tools.
Conclusion:
In this Q&A, we covered the main points discussed in the YouTube video “.” We hope these answers help clarify any doubts you may have had while watching the video. Remember to exercise caution while working with tools and materials and enjoy the process of building your own jewelry box. Happy woodworking!
Final Notes
In conclusion, this YouTube video titled “” provides valuable insights into the process of constructing the lid and case for a jewelry box. The creator shares their method of using cherry wood and maple inlay to create a laminated top, which is then attached to the frame using 3/4 inch maple strips. They also discuss various considerations, such as rounding the sharp edges, clamping the warped medallion, and covering the plywood backside. Additionally, they highlight the importance of using spray finish for the medallion and an alcohol-based clear coat for the gold paint. Overall, this video offers professional advice and techniques for achieving a beautiful and functional jewelry box.
Fitting the lid and case for a customized jewelry box is the last step in the construction process. Gluing and reinforcing the lid with hinges follows several steps to give the box a strong and secure finish.
Firstly, position the lid on the box with the thin lip downwards towards the base of the box. Glue the lid onto the box in a tight manner to ensure that it is secured. When it is secured, make sure to check that it functions properly and is held in place without incident.
Secondly, carefully place two small hinges in the center of the lid, to ensure it opens and closes smoothly. Attach the hinges to the lid using a brad gun and make sure that the screws on both sides are lined up.
Thirdly, given the lid is already secured, using a damp cloth, wipe away any excess glue that is leaked from the joining of the lid and the box.
Lastly, fit the brass latch on the lid to keep the box securely shut. Pre-drill a small hole in the lid, so the latch can be quickly fitted with no mistakes.
To complete your jewelry box construction, it is advised to measure and line the box with velvet or another soft material to prevent jewelry from being scratched. That said, the vital steps have already been taken to ensure a quality customizable jewelry box. Glue, hinges, and a latch bring the box together and make it secure enough to keep cherished items safe.