Assembling the cabinet and rebate vs. rabbet. | LOCKDOWN Day 49

Title: Assembling the Cabinet and the Discussion on Rebate vs. Rabbet | LOCKDOWN Day 49

Introduction:
Welcome to today’s blog post, where we delve into the topics discussed in the recent YouTube video titled “”. In this video, we join an enthusiastic woodworker as he embarks on his new plans for assembling a cabinet. The video provides valuable insights into the process of creating the cabinet’s sides, center divider, and much more. Join us as we explore the details shared in the video and dive into the intriguing debate surrounding rebate and rabbet techniques in woodworking.

With a thoughtful and professional tone, the video’s transcript takes us through the woodworker’s diligent setup and cut measurements for the different components of the cabinet. We witness the precision and strategic planning involved in creating the center dado, the top, base, dedos, and rabbits. Alongside the practical aspects of assembling the cabinet, an amusing discussion arises regarding the differing terms used for “rabbits” between various English-speaking regions, adding a touch of humor to the woodworker’s meticulous process.

Furthermore, the video showcases the woodworker’s wise decision to pace himself and cut the dados and rabbets on a separate day, ensuring a refreshed mind and accurate execution. As we reach the conclusion of the video, the carpenter expresses his readiness to assemble the cabinet, leaving only the cutting of the shelf for the drawer dividers for later.

Stay tuned as we dissect these intriguing woodworking techniques, examine the differing terminology, and gain valuable insights into the artistry and craftsmanship that goes into creating a beautiful cabinet. Let’s explore the fascinating details shared in this riveting video and expand our knowledge in the realm of woodworking.

Note: Before diving into our discussion, the woodworker shares a follow-up comment from a viewer who kindly sent a card to aid in the videographer’s focus during shots. Indicating the engagement and supportive community surrounding his channel, this instance highlights the positive interactions occurring within the woodworking community.

So, without further ado, let’s jump right into the engaging topics covered in this captivating YouTube video!

Below Table of Contents

• 1. “Building the Cabinet: A Step-by-Step Guide”
• 2. “Understanding the Difference between Rebate and Rabbet in Cabinet Making”
• 3. “Mastering Dado and Rabbit Techniques for Precise Cabinet Assembling”
• 4. “Tips and Tricks for Efficient Cabinet Assembly during Lockdown
• Q&A
• Final Notes

1. “Building the Cabinet: A Step-by-Step Guide”

2. “Understanding the Difference between Rebate and Rabbet in Cabinet Making”

In cabinet making, it’s important to understand the difference between a rebate and a rabbet. The two terms may sound similar but they refer to distinct techniques used in joinery. Here’s a breakdown of each:

1. Rebate: A rebate is a recess or groove cut into the edge or face of a board. It’s typically used to create a step or ledge for another board to fit into. In the video, the carpenter demonstrates cutting rebates on the edges of some boards to hold the sides of the cabinet in place. These rebates are 3/4 inch wide and are crucial for the structural integrity of the cabinet.

2. Rabbet: On the other hand, a rabbet is similar to a rebate but it’s cut on the edge of a board rather than the face. It’s often used to create a flush joint between two boards or to hold back panels in place. In the video, the carpenter mentions cutting a rabbet that is 1/4 inch less deep on the center divider of the cabinet to accommodate a back panel.

Understanding the difference between rebates and rabbets is essential for successful cabinet making. These techniques play a crucial role in creating strong and secure joints in woodworking projects. By mastering these techniques, carpenters can achieve precise and professional results in their cabinet making endeavors.

3. “Mastering Dado and Rabbit Techniques for Precise Cabinet Assembling”

Now that I have my setup ready from cutting the left and right panel, I can proceed with the center divider. It will be the same length as the sides, but a quarter inch less deep to accommodate the back panel. To cut the dado for the center divider, I have stacked dado blades on my table saw and adjusted them to half the thickness of the plywood. The top and base pieces will also have identical dados, running from the front to the back.

Next, I will cut all the dados on the right side and the center divider. These dados will be equal in size, allowing me to cut them all at the same time. I have prepared a dado diagram to measure the distance between the blades and my rip fence, making it easier to repeat the cuts accurately. Once I reach the halfway point, I will flip the diagram and measure from the other side.

After cutting the dados, I will move on to cutting the rabbits on the edges of these and a few other boards. To achieve 3/4 inch wide rabbits on the top and base pieces, I have set up a sacrificial fence on my rip fence. These rabbits will act as the support for the sides of the cabinet. It is important to note that these 3/4 inch rabbits are the only ones required for this project.

With all the necessary cuts completed, I am now ready to assemble the cabinet. The only remaining task is to cut the shelves for the drawer dividers, which I will do once the carcass is assembled. It is always satisfying to see the progress after cutting all the dados and rabbits. Thankfully, I decided to do this task today instead of rushing it yesterday when I was tired. Now, I can focus on assembling the cabinet and bringing my vision to life.

4. “Tips and Tricks for Efficient Cabinet Assembly during Lockdown

In order to ensure an efficient cabinet assembly process during lockdown, there are several tips and tricks that can be followed. Firstly, it is important to ensure that all the necessary materials and tools are prepared and organized before starting the assembly. This includes having the plywood cut to the right dimensions, setting up the table saw with stacked data blades, and creating a dado diagram for easy measurement.

When cutting the center divider, it is important to make it a quarter inch less deep in order to accommodate the back panel of the cabinet. By using the dado diagram and measuring the distance between the blades and rip fence, the dedos in the right side and center divider can be cut at the same time, saving both time and effort.

After cutting the necessary dedos and rabbits, the cabinet carcass can be assembled. It is recommended to cut the shelves for the drawer dividers after the carcass is assembled, ensuring a more precise fit. By following these tips and tricks, an efficient and successful cabinet assembly can be achieved even during lockdown.

Note: The following HTML formatting elements can be used in this section: `

`, `
• `, ``.
  

  Q&A

  Q: What is the video about and what are the main topics discussed?
  A: The video is about assembling a cabinet and the difference between rebate and rabbet. The main topics discussed include cutting the center dado, measuring the distance between blades and rip fence, cutting the rabbits on the edges of boards, and assembling the carcass of the cabinet.

  Q: What is the purpose of the setup for cutting the links of the left and right panel?
  A: The purpose of the setup is to ensure that the two sides and the center divider of the cabinet are all cut to the same length.

  Q: What is the difference on the center divider compared to the sides?
  A: The difference on the center divider is that it needs to be a quarter inch less deep because of the back quarter inch panel that will go on the cabinet.

  Q: What tool is used to cut the center dado in the top and base pieces?
  A: The table saw with a stack of dado blades is used to cut the center dado in the top and base pieces.

  Q: How are the dedos in the right side and the center divider cut?
  A: The dedos in the right side and the center divider are cut using a dado diagram to measure the distance between the blades and the rip fence.

  Q: What type of cuts are made on the top and base pieces to hold the sides in?
  A: 3/4 inch rabbits are cut on the edges of the top and base pieces to hold the sides in place.

  Q: What are the differences in pronunciation for “rabbit” and “rebate” mentioned in the video?
  A: The video mentions that some people may pronounce “rabbit” as “rebate”, depending on their location or dialect.

  Q: Why is the speaker glad they waited until today to cut the dados and rabbets?
  A: The speaker is glad they waited because cutting the dados and rabbets can be tiring, and doing it when they were already tired at the end of the day would have been rushed and potentially sloppy.

  Q: What is the remaining step after assembling the carcass of the cabinet?
  A: The remaining step is to cut the shelves for the drawer dividers to size once the carcass is assembled.

  Q: What is the purpose of the card that the speaker received from Lee?
  A: The card was sent by Lee to help the speaker focus when setting up their shots in videos, as the speaker had mentioned being often out of focus in previous videos.

  Final Notes

  In conclusion, the YouTube video “” outlines the process of assembling a cabinet and delves into the debate between rebate and rabbet joinery techniques. The video provides a clear demonstration of how to cut dados in the top and base pieces, as well as the dedos in the right side and center divider. The presenter also discusses the importance of measuring accurately and shares a dado diagram for reference.

  Furthermore, the video touches on the concept of rebates and their role in holding the sides of the cabinet together. The presenter humorously acknowledges the debate surrounding terminology, mentioning regional variations in how the word “rabbit” is pronounced.

  The video concludes with the presenter expressing gratitude for waiting to cut the dados and rabbets, as rushing through the process would have compromised the final result. The only remaining task is cutting the shelves for the drawer dividers, which will be done once the carcass is fully assembled.

  Overall, this video provides a valuable insight into the assembly process of a cabinet and offers practical tips for achieving precise joinery. The presenter’s engaging and professional demeanor makes it an enjoyable watch for both woodworking enthusiasts and beginners alike.
  
  

  Today, on day 49 of the lockdown, we are looking at the‍ assembling of⁣ the cabinet​ and the differences between a‍ rebate and⁣ a rabbet.

  
  The cabinet‌ is a classic piece ​of home ⁣furnishings that can be both attractive and functional. ⁤An ⁤essential part ‌of​ building ⁢a cabinet is the joining of sections or components‌ together. A rebate or a rabbet are‌ both methods of aligning ‌and attaching components.

  
  When ‌it comes to constructing cabinets, a rebate ‍is ​an angled cut‌ in the wood that allows two‌ pieces ‌to ‍fit ⁢together at an angle, usually while ⁤leaving space between the pieces ‌for gluing or​ fastening.​ Meanwhile, a rabbet is⁢ a 90-degree cut in the wood ⁢that allows two⁣ pieces‍ to fit together flush while the edges ⁢overlap, creating ⁣a joint. To​ make a rabbet, you‍ cut‍ a ⁢channel along the inside edge ⁢of the board and⁣ then ​cut away‌ material ‌to form⁤ a lip.

  Rebates and‍ rabbets are commonly used ‍during ⁣assembly, and each offers different advantages. Rebates are easier⁢ to set up and can be‍ created with⁢ a‍ few simple cuts, while rabbets offer a‍ more secure ⁤connection ⁢beneficial in ⁢areas with a high frequency of bending, ⁢vibration,⁢ or movement.

  
  Both⁤ rebates​ and‍ rabbets provide​ an essential ⁤part of cabinet⁣ assembly.‍ As the lockdown‌ enters ‍its 50th day, consider taking a‍ hands-on ‌approach to ‍assembling the cabinet and utilizing⁣ either ‌of these ‍techniques – it ​will at least⁢ provide a productive distraction!