Are Outdoor Finishes Useless? Refinishing My Patio Table.

Are Outdoor Finishes Useless? Refinishing My Patio Table.


Clickable here
If you’re someone who enjoys spending time outdoors and loves DIY projects, then you’ve probably come across the dilemma of how to protect your outdoor furniture from the elements. In a recent YouTube video titled “Are Outdoor Finishes Useless? Refinishing My Patio Table”, the creator shares their personal experience with finishing their patio table and the surprising results they discovered. The video begins with a discussion of the initial mistake made in using a certain spar urethane, which claimed to provide ultimate protection and outstanding UV and weather resistance. However, after just a year, the finish began breaking down and mold started to appear.

To better understand the impact of outdoor finishes, the creator compares this unfortunate outcome to an untreated planter box made of two by fours and redwood edging that has been sitting in the same location for four years. Surprisingly, the untreated planter box has held up remarkably well and looks much better than the table. The video raises the question: what is the point of finishing outdoor projects if they don’t seem to provide long-term protection?

The creator acknowledges the brutal effect of weather on any finish and points out that many finishes recommend yearly reapplication for best results. However, they admit that realistically, not many people actually do this. So what is the best protection against the elements? According to the video, a coat of latex house paint is the most durable and long-lasting option. But of course, painted patio furniture may not be appealing to everyone.

In this video, the creator takes on the task of refinishing their table using a redwood deck stain that they have had success with in the past. They start by killing and removing the mold using a product called x-14, then proceed to remove the remaining finish using 80 grit sandpaper and a sander. The video gives a step-by-step guide to the refinishing process and highlights the ease of application and durability of the chosen stain.

Overall, this YouTube video provides valuable insights and raises important questions about the effectiveness of outdoor finishes. If you’re someone who loves spending time outdoors and wants to protect your furniture, this video is a must-watch. Stay tuned to find out if the refinishing process provides a long-term solution to the creator’s patio table woes.

Below Table of Contents

1. The Downside of Outdoor Finishes: Lessons Learned from a Patio Table Mistake

The video discusses a patio table mistake the creator made two years ago when finishing it with a certain spar urethane, a water-based finish specifically for outdoor projects. The finish lasted about a year before it started breaking down and attracting mold, resulting in an unsightly appearance.

In comparison, the creator shares an experiment they conducted four years ago with an untreated planter box made of two by fours and redwood edging. Despite being completely unfinished, the planter box has held up well in the same location, exposed to the elements and direct sunlight. It’s important to note that the color of the wood may gray out over time, but the integrity of the wood is what matters in the long run.

While it may seem tempting to leave outdoor projects unfinished, the video emphasizes the importance of protecting them from the elements. One recommendation is to use a coat of latex house paint, known for its durability and long-lasting effects. Another option is to use a redwood deck stain, as it provides durability, ease of application, and the option to refresh the finish after a few years. The creator discusses how they are going to refinish the table using a redwood deck stain, starting with removing the mold using a product called x-14. They then proceed to wash the table and remove the remaining finish with sandpaper and a sander.

2. The Impact of Weather on Outdoor Furniture: A Comparison of Finishes

When it comes to outdoor furniture, the impact of weather on their overall condition cannot be understated. One key factor to consider is the type of finish used on these pieces, as it plays a crucial role in their durability and resistance to weather elements. In a recent experiment, a professional woodworker tested the effects of different finishes on two outdoor furniture items: a patio table and a planter box.

On the patio table, a certain water-based spar urethane finish was applied, specifically designed for outdoor projects. While the finish initially provided ultimate protection and outstanding UV and weather resistance, it began breaking down after just one year. Additionally, the table became a breeding ground for mold, which visibly affected its appearance. This highlights the importance of not only selecting the right finish but also considering the maintenance required to ensure its effectiveness.

In comparison, the planter box was left completely unfinished, serving as a control in the experiment. Despite being exposed to the same elements as the table, it has held up exceptionally well, showing no signs of deterioration. This demonstrates that, while finishing outdoor furniture is necessary, there are alternative options to consider, such as leaving the wood untreated or opting for a different type of finish that requires less maintenance. Ultimately, the key is to prioritize the longevity and integrity of the wood, rather than solely focusing on its appearance.

3. Is Finishing Outdoor Projects Worth It? Exploring the Longevity of Different Finishes

In this video, the presenter discusses the longevity of different finishes on outdoor projects, specifically patio furniture and planter boxes. The presenter shares their personal experience with using a water-based spar urethane finish on a patio table, noting that it lasted only a year before breaking down and attracting mold. On the other hand, an untreated planter box made from two by fours and redwood edging has been holding up great after four years, despite being exposed to the elements.

The presenter points out that the finish on outdoor projects may not necessarily be judged by its initial color, but rather by how the wood maintains its integrity over the years. While the weather can be brutal on any finish, the video suggests that latex house paint provides the best protection and can last for years without needing to be reapplied. However, it acknowledges that painted patio furniture may not be everyone’s preference.

To illustrate an alternative option, the presenter decides to refinish their table with a redwood deck stain. This product is known for its durability and ease of application. The presenter demonstrates the process of removing the old finish using 80 grit sandpaper and a sander, and then proceeds to stain the table with the redwood deck stain.

Overall, the video suggests that while finishing outdoor projects is recommended, it is important to keep in mind the impact of weather on any finish. It also highlights the benefits of using latex house paint or durable deck stains that can be easily refreshed with a new coat when needed.

4. Refinishing Strategies for Outdoor Furniture: A Step-by-Step Guide to Restoring Your Patio Table

If you’ve noticed that your outdoor furniture is starting to look worn and weathered, it may be time for a refinishing project. Whether you have a patio table like the one in the video or any other piece of outdoor furniture, following these step-by-step strategies can help restore its beauty and extend its lifespan.

1. Assess the current condition: Before you begin the refinishing process, take a close look at your furniture. Determine if there is any mold, peeling finish, or other damage that needs to be addressed. This will help you plan your refinishing approach effectively.

2. Remove mold and prepare the surface: If your furniture has mold like the table in the video, start by removing it using a mold-killing product. Afterward, thoroughly clean the surface with soap and water or a bleach solution. This step is crucial for ensuring the new finish adheres properly.

3. Strip the old finish: To remove the remaining finish, use 80 grit sandpaper along with a sander. This will help smooth out any rough spots and create a clean surface for the new finish to adhere to. Be sure to wear protective gear such as goggles and a mask to avoid inhaling any dust particles.

4. Apply a durable finish: Once the surface is prepared, it’s time to apply a new finish. Consider using a product like the redwood deck stain mentioned in the video. This type of finish is known for its durability and ease of application. It can be refreshed with a new coat as needed, making maintenance easier in the long run.

Remember, outdoor furniture is exposed to harsh weather conditions, so a yearly reapplication of the finish is recommended for optimal protection. However, if you prefer a long-lasting and low-maintenance option, latex house paint may be a suitable alternative. Just keep in mind that painted furniture may not be everyone’s aesthetic preference.

By following these refinishing strategies, you can bring new life to your outdoor furniture and ensure its longevity. Don’t let the elements damage your investment – take the necessary steps to restore and protect your patio table or any other outdoor furniture you have.

Q&A

Q: What mistake did the blogger make when finishing their patio table?
A: The blogger made the mistake of finishing the patio table with a certain spar urethane, a water-based finish especially for outdoor projects.

Q: How long did the finish last before it started breaking down?
A: The finish lasted about a year before it began breaking down.

Q: What problem did the table attract?
A: The table attracted mold, which can be seen all over it.

Q: How does the planter box compare to the table in terms of durability?
A: The planter box, which was left completely unfinished, is holding up great and looks better than the table.

Q: What is the recommendation for finishing outdoor projects?
A: It is not recommended to skip finishing outdoor projects, as weather can be brutal on any finish. The best protection against the elements is a coat of latex house paint, which can last for years without much attention.

Q: What product did the blogger use to refinish the table?
A: The blogger used a redwood deck stain to refinish the table, as it is durable and easy to apply.

Q: What did the blogger use to remove the mold from the table?
A: The blogger used a product called x-14 to kill and remove most of the mold from the table.

Q: How did the blogger remove the remaining finish from the table?
A: The blogger used 80 grit sandpaper and a sander to remove the remaining finish from the table.

Q: What did the blogger purchase to make the sanding process easier?
A: The blogger purchased a pressure washer to speed up the process of removing the finish from the table.

Final Notes

Thank you for watching the YouTube video “” In this video, the creator discusses the challenges and drawbacks of using certain spar urethane finishes for outdoor projects, specifically focusing on their limited durability and their tendency to attract mold. Additionally, the video compares the longevity and appearance of a completely unfinished planter box to the finished patio table, highlighting the importance of wood integrity over the years rather than relying solely on the color of the finish.

While the video acknowledges the difficulties of maintaining outdoor finishes, it does not discourage their use entirely. Instead, it emphasizes the need for regular maintenance and reapplication, which can be particularly daunting for many individuals. As per the creator’s recommendation, a coat of latex house paint can offer the best protection against the elements for an extended period.

To address the issues with the patio table, the creator decides to refinish it using a redwood deck stain, a durable and easy-to-apply product. The video highlights the removal of mold using a product called x-14 and showcases the process of stripping the old finish with 80 grit sandpaper on a sander. Ultimately, the video exemplifies the creator’s decision to refinish the table, allowing for a fresh coat of finish to be easily applied in the future if necessary.

In conclusion, finishing outdoor projects can provide protection and enhance their appearance. However, it is crucial to understand that these finishes require regular maintenance and reapplication. This video serves as a valuable resource for those considering refinishing their outdoor furniture and emphasizes the importance of selecting the right products and methods to ensure long-lasting and visually appealing results.
Clickable here

Outdoor furniture can take a beating in the elements, and refinishing it can be an arduous, time-consuming process. So, is it really necessary to refinish outdoor furniture?

The answer is yes. The elements can take a toll on outdoor furniture, and refinishing it regularly is the best way to protect it from weather damage, discoloration, insect infestation, and other signs of wear and tear.

For example, refinishing a patio table is an excellent way to prevent the wood from turning gray, cracking, or warping due to sun exposure. It will also help to protect the table from damage caused by rain, wind, or extreme temperatures. Applying a sealant to the table will also help to inhibit mildew growth and keep the wood looking its best for years to come.

In refinishing a patio table, the important step is to sand the surface of the wood to remove any old finish. This will ensure that the new finish will adhere to the wood and not be affected by any imperfections. The next step is to apply the finish or sealant of your choice; it could be a stain, paint, or varnish. Remember to read the instructions on the product label carefully and follow them accordingly.

The final step is to protect the newly sealed patio table from the weather and other environmental elements. If the table is exposed to the outdoors, investing in an outdoor furniture cover will greatly help to extend its lifespan.

To sum up, refinishing outdoor furniture is essential to help keep it looking its best for years to come. Making time to refinish your outdoor furniture is well worth the effort because it will help to protect it from weather damage and other signs of wear and tear.


Posted

in

, , , ,

by

Tags: